Wilo Mather & Platt — the full range.
Authorised Wilo dealer — vertical multistage pressure-boost, end-suction, split-case, submersible wastewater and firefighting pumps from ~0.5 kW to 250+ kW. Sales and chargeable installation across Delhi NCR.
- Authorised dealer
- Pressure boosting
- End-suction
- Submersible
- Fire pumps
One catalogue, every duty point.
Where Wilo pumps earn their keep.
Pressure boosting
Steady, high-pressure water flow for buildings, homes, hotels and industrial facilities. Variable-speed packages for variable-demand sites.
Drainage & dewatering
Rapid water removal from basements, construction sites and mines. Submersible wastewater pumps for dirty-water duty.
Sewage & wastewater
Efficient pumping, transport and treatment of sewage and contaminated water for municipalities, STPs, ETPs and industries.
Firefighting
Wilo's firefighting range — end-suction, split-case and jockey pumps, often configured as electric main + diesel standby + jockey packages.
HVAC & building services
Primary, secondary and tertiary pumping in HVAC plant rooms. Chilled water, condenser water, hot water loops.
Industrial process
Precision pumps for chemical, food, pharma and process water applications — stainless options where fluid chemistry demands it.
Wilo's core pump families — matched to your duty.
Wilo has a deep catalogue. The table on the right is the starting shortlist we reach for first — the series that covers 90% of the applications we see in Delhi NCR. For unusual duties (high-temperature, corrosion, hygienic construction), we’ll pull from the rest of the catalogue.
Pumps are part of a system. We quote pumps alongside controls, VFDs, pressure vessels and pipework — so the whole package works, not just the machine on the floor.
Wilo Mather & Platt — Core Series
| Split-case | Large-flow split-case pumps — building services, municipal water supply (typ. 15–250 kW) |
|---|---|
| End-suction | End-suction single-stage block pumps for HVAC, process and industrial water (typ. 1.5–110 kW) |
| Vertical multistage | High-head vertical multistage for pressure-boosting and RO feed (typ. 0.55–37 kW) |
| Submersible wastewater | Submersible pumps for STP/ETP, stormwater and sewage lift stations (typ. 1.5–75 kW) |
| Firefighting range | End-suction, split-case and jockey pumps in NFPA 20 / IS-compliant packages |
Four things every Wilo customer gets.
Authorised supply
Factory warranty, genuine spares, and technical support from Wilo Mather & Platt India backing every quote we give.
Installation & commissioning
Installation, alignment, trial runs, testing and handover — done by our engineers with commissioning reports. Chargeable service, separate from pump supply.
Genuine spares
Impellers, mechanical seals, bearings, casings and gaskets — supplied genuine. Rebuild work is routed to OEM-authorised workshops.
Duty-point sizing
Every quote starts from your flow, head and fluid, with model selection confirmed against the latest OEM catalogue.
Frequently asked questions
Is Trading Engineers an authorised Wilo Mather & Platt dealer?
Yes — our pumps business (Trading Engineers, est. 1949) is an authorised dealer and service partner for Wilo Mather & Platt in North India. Sales, installation and commissioning come from the same team. Final selection is always confirmed against the OEM catalogue and the customer's duty point.
Which Wilo pump suits building pressure boosting?
Vertical multistage pumps are the standard pick for pressure boosting — high head per stage, variable-speed ready, and compact enough for typical plant rooms. We size against your flow, head and number of fixtures, then confirm the model against the latest Wilo catalogue before quoting.
What about HVAC plant-room pumping?
End-suction or split-case depending on flow. Typical chilled-water primary/secondary loops are straightforward; we spec pumps-in-parallel with VFDs where part-load operation matters. The kW range is typically 5.5–110 kW per pump for mid-size plants.
Do you do on-site installation and commissioning?
Yes — installation, alignment, trial runs, pressure-flow testing and handover with commissioning reports. These services are on a chargeable basis, separate from the pump supply.
Do you do motor rewinding or impeller refurbishment in-house?
No — we are a sales and installation house, not a workshop. We supply genuine spares (impellers, mechanical seals, bearings, casings, gaskets) and route rebuild work to OEM-authorised workshops to keep the factory warranty intact.
Do you supply Wilo fire pump packages?
Yes — complete NFPA 20 / IS-compliant packages: electric main + diesel standby + jockey pump with controllers and pressure vessel. Final model selection is confirmed against the OEM catalogue before quoting. See /pumps/fire for details.
Need help choosing a Wilo pump?
Share flow rate, head, fluid type and site — we'll recommend a series and model, then quote.